How to Build a Three Season Room

Published: 19th May 2010
Views: N/A

How to build a three season room

Can be made from the three season room on the terrace surfaces so you do not have to start from scratch by building on new rooms and expensive. To eat a comfortable and happy during the summer, spring and autumn, there is no need to install heating, plumbing or insulation that you need for the live permanently.

Using ready-made doors and panels eliminates the need for costly work, carpentry and milling. You must obtain a building permit before starting the local, which involves developing a plan and get approval. There will be fees involved in this process. Construction without a permit may invalidate your home insurance, which is also illegal.

Tools and equipment needed:

* Tools and equipment for pouring the concrete slab, if necessary

* 2 × 4 inch boards. Enough to go around the perimeter of the balcony

* Door frame

* New jobs, if necessary

* Square

* Devices to connect to the concrete panels

* Concrete Anchors

* Hammer drill with bits

* Saw wood

* Wall sorting

* Commodities and rifle

¾ * link councils inches by 1 inch and a half

* Your choice of wood door or pre-painted,

* Paint and paintbrushes

Step 1 - floor building

Build a solid foundation for the balcony of your home, if you do not already have one. Floors can be used, or you can pour a new slab. If you have a solid ground exists, you may need to add additional support to hold the weight of the new walls and fixtures. If you have existing concrete panel, make sure that the water can not flow into the room during storms. There should be 1 to 3-inch slope to allow drainage.

Step 2 - Lay the vicinity of councils

Replace any rotted or functions is appropriate. 4 new of 4 inches of suitable posts with metal plates above. Put 2 of 4 inch boards around the perimeter, with the exception of the door where he will go. Use the box to make sure the box would do well. Attached to the concrete with concrete anchors and hardware.

Step 3 - building walls

Construction of the side walls. Anchor them to the outside of the wall. Using the test is the cheapest option. If you do not use plates made by check, and to link these screens in place, then cover the edges with batten boards. Cut the wires to check the correct size of the openings, and make sure they overlap by 1 inch. Staple the top edge. Drag down, sorting, linking with the bottom edge of basic goods, and to work outside the center.

Make sure there are no wrinkles, staple the two sides, beginning in the middle, and instead work from one side to the other. The nail on the links on the edges of the screen.

Step 4 - Hang door (s)

Make the frame for the door. Hang the doors. splashboards installed along the bottom of the plates to avoid the rain and mud from coming. If you're hanging doors of the screen, or use of air springs until the spring closing the back door and prevent the entry of insects.

Step 5 Replace the ceiling

Replace some of the ceilings, roofing materials and clear if it is required more light.

Step 6 Finish Details

Paint all wood surfaces. Install fans and lighting. Make sure the equipment approved for use in the outdoors.

If you are using a window prior to the adoption of the walls, you will need to make additional framing to support them in the walls.

Report this article Ask About This Article

More to Explore